John Deere 220C Walk Greensmower Maintenance Guide
Common sense goes a long ways when maintaining your machine. If you have extreme heat, dust, or terrain that you operate in you, service frequency will need to increase.
Service Schedule Parts for a John Deere 220C Walk Greensmower
While your John Deere machine is certainly built with quality parts, they have a limited life. Good news is you can easily service your machine yourself using a John Deere maintenance kit or service kits or by getting the specific John Deere part needed to keep your John Deere mower or tractor running for a long time. These are the parts on your John Deere 220C Walk Greensmower that need to be regularly serviced.
|4 – 1 qt Plus 4 10W30 Engine Oil TY26811||Every 20/50/100/150/200/250|
|3 – Moly High Temp EP Grease (14 oz) TY6333||As Needed|
|1 – 1 gal Hygrad Trans Oil TY6354||Every 50|
Commonly Used Parts for a John Deere 220C Walk Greensmower
Outside of the schedule service intervals, you may need a part for a quick repair. While this is not an inclusive list of all the parts for a John Deere 220C Walk Greensmower, these are the typical parts that we see purchased for your model.
|Filter Element AM12309|
|Push Pull Cable AMT1680|
|Clutch Cable AMT2741|
|Brake Cable AMT2742|
|Belt - Set of 2 AMT2800|
|Brake Band AMT820|
|Toggle Switch AT106154|
|Bearing - Chain Drive JD10181|
|Spark Plug M128206|
|Outer Filter MIU11464|
|Compression Spring MT1200|
As Needed Parts for a John Deere 220C Walk Greensmower
Regardless of your John Deere model, these John Deere parts are used frequently in maintaining and your John Deere 220C Walk Greensmower and can be used around your garage.